Servo Stabilizer Manufacture in Chandigarh | APFC Panel

APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as a ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Everyone knows that how costly electricity has become in present time. Therefore it becomes utmost important to cut down on electrical consumption for reducing expenditure.

APFC Panels come real handy in the achievement of this purpose Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to a large electrical load. A dip in Power Factor can attract operational losses and a penalty from electricity board, responsible for electricity supply.

SALIENT FEATURES:-

  1. All major components are of standard make like Siemens, Epcos, L&T, and Schneider
  2. Microprocessor-based automatic controller with power factor display
  3. All components are carefully integrated for reliable performance and longer life
  4. Capacitor duty Contactors and MCB or MCCB, are used to switch ON capacitors to minimize switching surges
  5. Uses small correction steps to maintain the accurate setting
  6. Auto / Manual Facility, Cooling Facility
  7. Power Factor Controllers are designed to operate, Automatically with Micro Processor Based Automatic Controller
  8. Improvement of power factor up to optimum levels is guaranteed Product range: 20 KVAr to 1000 KVAr.
  9. Heavy-duty capacitors with detuned filters will be provided where high-level non-linear harmonies present up to 30%
  10. In-built time delay for switching ON of a capacitor bank to avoid impulse signal operation. All capacitor feeders have Auto / Manual mode facility with fuse protection and isolation

ADVANTAGES:-

  1. The payback period is 8 to 10 months
  2. Reduction in maximum demand
  3. Energy-saving up to 5%
  4. Low power factor penalty can be avoided
  5. Extended life for Switch Gears, Capacitors, and Cables
  6. Avoid manual disruptions
  7. Avoid high current consumption losses
  8. Reduction in Electricity Bill

TECHNICAL SPECIFICATIONS:-

ABS Power products stand as a symbol of reliability, durability, low maintenance and energy efficiency. We manufacture and export quality products such as Servo Voltage Stabilizers, Isolation Transformers, Static Stabilizer, LT Panels, Variable Transformers, Voltage Regulator & Controllers, APFC Panel, and Online UPS. Superior design and reliable engineering is our core strength and manufacturing excellence help us offer dependable solutions for all types of power quality problems related to voltage, frequency, transients, harmonics, ground leakage currents, power factor etc.

Best Servo Voltage Stabilizer Manufacturer in Ambala

ABS Power offers a range of high-quality products such as Servo voltage stabilizer, lt panels, isolation transformer, static transformer, and others at the best price. We are an ISO 9001:2008 certified servo voltage stabilizer manufacturer in Ambala, serving for more than 35 years in the development of stabilizers.

Servo Stabilizer Manufacture in Chandigarh | Air & Oil Cooled Stabilizers

Voltage variations are an increasingly common and dangerous nuisance that can damage electronic components like power supplies, drives, PLCs, controllers, etc. Their effects are widely felt in CNC, Printing, Textile machines in addition to Laboratory, Data processing, Medical & Telecommunication equipment. As an effective solution, UCPL has designed state of the art Voltage Stabilizers to protect this equipment against voltage variations and offering improved power quality, thereby minimizing break downs of costly equipment.

ABS Power Stabilizers are manufactured out of a prime grade of magnetics & electrical conductors, housed in enclosures manufactured on CNC machines & powder coated as per IS/BS standards. Stringent quality assurance program at various stages of manufacturing ie. raw materials, sub-assemblies, assembly & finished goods ensures high reliability & consistent performance.

Our Servo voltage stabilizers provide controlled & desired output voltage against a wide range of voltage fluctuations. Apart from protecting the equipment from damage, they save energy during high voltage conditions.

UNIQUE FEATURES:-

  1. Instant Response & Fast Corrections:- Variable speed servo motor and proportional control circuit provide a response time of 10msec. to correct voltage fluctuations without noise or oscillations in output.
  2. Lower Running Cost:- Due to the high operating efficiency of better than 98% as compared to 95% from other brands.
  3. Digital Metering System:- Datalogger with LCD/LED display screen provides detailed information about various electrical parameters to help monitor power quality (optional).
  4. Universal Fit:- Designed to work on unbalanced line and load conditions when each phase is individually controlled with separate variable speed motors and electronic controls.
  5. D.G. Compatibility:- Special RMS sensing circuit eliminates drift in output voltage, current, frequency even with the distorted waveform to avoid unnecessary tripping.
  6. Quality Components:- Components conforming to CE/IS/BS/VDU standards are used and thoroughly tested as per relevant standards.
  7. Fast Payback:- Reduced power loss and resultant lower running cost yield higher cost savings and help the customer recover the cost difference in a few months.

RATINGS:-

ABS Power is synonymous with power quality and energy management. The people behind ABS have a comprehensive experience of over 35 years in design & development, manufacturing, and quality assurance. We manufacture and export quality products such as Servo Voltage Stabilizers, Isolation Transformers, Online UPS, LT Panels, etc.

Servo Stabilizer Manufacture – LT Panel

LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and, therefore, they are quite rugged to withstand different climatic conditions. Our LT panels are designed to work with low electricity consumption that makes them cost-effective

LT panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machinery, cooling plants and other devices installed. There is always a possibility of damage to this equipment if power fluctuates. In case of fixed loads, they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.

LT Panel

Components:-

Bus-bars:

The bus bars and interconnections shall be insulated with heat shrinkable PVC sleeve and be color coded is red, yellow, blue, and black to identify the three phases and neutral of the LT panel.

Air Circuit Breaker:

Air circuit breakers, which are usually employed for the protection of electrical equipment with tripping coil connected to a relay designed to open the breaker automatically under abnormal conditions, such as overcurrent, overload, overloads, etc.

LEDs:

LED stands for the light emitting diode. These are mainly used for making indicators and various other types of lightning. These are mainly used in meters, indication lamps, traffic signals, exit signs, lightweight message, displaying box, etc.

Meters:

These meters are digital type. These are multi-functioning meters. It should measure KW, KVA, KVAR, V, I, PF, etc.

Relay:

A relay is an automatic device which senses an abnormal condition of LT panel and closes its contacts.

Switches:

A switch is used in LT panel as a device for making or breaking the electric circuit. The switches may be classified into this panel such as Rotary switch and push button.

HRC Fuses:

HRC fuses or high rupturing capacity fuses. In these types of fuse, the fuse wire or element can carry fault current for known time. During this time the fault is cleared, then it does not blow or melts otherwise it melts.

ABS Power manufacture and export quality products such as Servo Voltage Stabilizers, Isolation Transformers, LT Panel, APFC Panel, Online UPS, and Static Stabilizer. Our products stand as a symbol of reliability, durability, low maintenance and energy efficiency.